ATLAS Ci4400 Weather-Ometer氙灯老化箱 水冷氙灯系统 实验室老化测试仪器

名称：Ci4400氙灯老化箱

品牌：ATLAS 亚太拉斯（美国）

 

介绍：

100多年来，Atlas改变了耐候性测试这门科学。新Atlas Ci4400 Weather-Ometer®是我们更先进的仪器，不但提供简单易用的操作、优异的均匀度，较大的箱体容量，并兼顾时尚的设计，给您带来值得信赖的价值和性能体验。凭借其简单易用的触摸屏界面和符合人机工程学原理的特点，这台先进设备又更上一层楼。

优异的可重复性和可再现性

气流、辐照和控制系统的设计和工程创新大大降低了关键测试参数的可变性。因此，Ci4400达到了全新水平的温度、湿度和光照均匀度。

 

特点：

6500瓦水冷氙灯系统

总暴露面积达7,300 cm2 (1,130 in2)

配可拆卸的三层转鼓式样品架

TFT全彩15寸触摸屏用户界面显示所有测试参数

直接设定并控制辐照度：340纳米、420纳米或300-400纳米

直接设定并控制BPT/BST

直接设定并控制相对湿度

直接设定并控制箱内空气温度

显示诊断信息

14种工厂预置测试方法

支持12个自定义程序的空间；亚循环性能

多语言功能（汉语、捷克语、英语、法语、德语、日语、韩语、波兰语、俄语、西班牙语、土耳其语）

通过以太网或USB接口输出数据。包含U盘

SmartLight Monitor智能化灯光监测系统，能验证是否安装了正确的光能监测点

样品前部喷淋和背部喷淋

滤镜组合以满足所有测试方法

进气管过滤器

CS-9氙灯冷却系统

水质监控及自动报警

测试状态指示灯

自带小型折叠式台面方便用户安置样品、试验记录本、耗材或电脑

箱门配可锁的闭锁系统

充足箱体进入空间以方便日常维护

使用校准氙灯或Xenocal校准器校验设备

试验箱观察窗

全球通用电器配置，适用于各种本地频率、电压和电气要求

满足CE、UL、ISO、EN与CSA安全要求

以辐照量和时间为单位自动倒计时功能

VibraSonic加湿系统

 

标准：

列出的标准和规范可能包含几个备选的测试选项，该仪器在任何列出的标准中至少满足一个选项。标准如有变更，不另行通知。 这可能导致测试技术的改变。经常与负责的标准开发组织检查标准的修订状态。

AATCC TM16.3

Colorfastness to Light: Xenon-Arc

AATCC TM169

Weather Resistance of Textiles: Xenon Lamp Exposure

AATCC TM16E

Colorfastness to Light

ASTM C1257

Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

ASTM C1442

Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

ASTM C1501

Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

ASTM C1519

Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

ASTM C732

Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

ASTM C734

Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

ASTM C793

Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants

ASTM D1148

Standard Test Method for Rubber Deterioration/Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

ASTM D1670

Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials

ASTM D2565

Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications

ASTM D3424

Standard Test Methods for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

ASTM D3451

Standard Guide for Testing Coating Powders and Powder Coatings

ASTM D4101

Standard Specification for Polypropylene Injection and Extrusion Materials

ASTM D4303

Standard Test Methods for Lightfastness of Pigments Used in Artists' Paints

ASTM D4355

Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)

ASTM D4434

Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

ASTM D4459

Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

ASTM D4637

Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane

ASTM D4798

Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

ASTM D4811

Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

ASTM D5010

Standard Guide for Testing Printing Inks and Related Materials

ASTM D5019

Standard Specification for Reinforced CSM (Chlorosulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane

ASTM D5071

Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

ASTM D5383

Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists

ASTM D5398

Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

ASTM D5819

Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

ASTM D6083

Standard Specification for Liquid Applied Acrylic Coating Used in Roofing

ASTM D6551

Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus

ASTM D6577

Standard Guide for Testing Industrial Protective Coatings

ASTM D6662

Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

ASTM D6695

Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

ASTM D6878

Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

ASTM D750

Standard Test Method for Rubber Deterioration Using Artificial Weathering Apparatus

ASTM D7869

Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

ASTM D904

Standard Practice for Exposure of Adhesive Specimens to Artificial Light

ASTM F1164

Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress

ASTM F1515

Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change

ASTM F2366

Standard Practice for Determining the Relative Lightfastness of Ink Jet Prints Exposed to Window Filtered Daylight Using a Xenon-Arc Light Apparatus

ASTM G151

Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

ASTM G155

Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

FLTM BO 116-01

Resistance to interior weathering

GB/T 10485

Road vehicles- Lighting and light-signaling devices- Environmental endurance

GB/T 14522

Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products

GB/T 16259

Test method for accelerated weathering of building materials

GB/T 16422

Plastics -- Methods of exposure to laboratory light sources -Part 2: Xenon-arc lamps

GB/T 16991

Textiles--Test for color fastness--Color fastness and ageing to artificial light at high temperatures: Xenon-arc

GB/T 1865

Paints and varnishes--Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon- arc radiation

GB/T 18833

Retro-reflective sheeting for road traffic signs

GB/T 29061

Performance films for glass in buildings

GB/T 32088

Accelerated weathering test methods of automotive nonmetallic components and materials using a xenon-arc apparatus

GB/T 3511

Rubber, vulcanized- Test method for resistance to artificial weathering (xenon-arc)

GB/T 5137

Automotive safety glass test method

GB/T 6151

Textiles-Tests for color fastness-General principle of testing

GB/T 8427

Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test

GB/T 8430

Textiles - Tests for color fastness to artificial weathering - Xenon-arc fading lamp test

GM 9125P

Procedures for Laboratory Accelerated Exposure of Automotive Materials

GME 60292

Designation of Colour Fastness and Resistance to Artificial Light

GMW 14162

Colorfastness to Artificial Weathering

GMW 14170

Coating Requirements for Elastomeric Seals

GMW 14650

Performance Requirements for Exterior Plastic Parts

GMW 3414

Test Method for Artificial Weathering of Automotive Interior Trim Materials

Hyundai MS 210-05

Molded Plastic Parts - Interior Use

Hyundai MS 300-32

Standard Test Method - Woven, Knit

IEC 60068-2-5

Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering

IEC 61345

UV test for photovoltaic (PV) modules

ISO 105-B02

Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

ISO 105-B04

Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test

ISO 105-B06

Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test

ISO 105-B07

Textiles - Tests for Colour Fastness - Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration

ISO 105-B10

Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation

ISO 11341

Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation

ISO 12040

Graphic technology - Prints and printing inks - Assessment of light fastness using filtered xenon arc light

ISO 16474-1

Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance

ISO 16474-2

Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps

ISO 18909

Photography - Processed photographic colour films and paper prints - Methods for measuring image stability

ISO 18930

Imaging materials - Pictorial colour reflection prints - Methods for evaluating image stability under outdoor conditions

ISO 18937

Imaging materials - Photographic reflection prints - Methods for measuring indoor light stability

ISO 29664

Plastics - Artificial Weathering Including Acidic Deposition

ISO 3917

Road vehicles - Safety glazing materials - Test methods for resistance to radiation, high temperature, humidity, fire and simulated weathering

ISO 4892-1

Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance

ISO 4892-2

Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources

JASO M346

Light-exposure test method by xenon-arc lamp for automotive interior part

JASO M351

Automotive parts - Accelerated weathering testing method by xenon-arc lamp for exterior parts

JIS B 7754

Light-exposure and light-and-water-exposure apparatus(xenon arc lamp type)

JIS D 0205

Test Method of Weatherability for Automotive Parts

MIL-STD 810F

Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.4: Solar radiation (Sunshine)

MIL-STD 810G

Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine)

Peugeot Citroen (PSA) D27 1389

Paint Coatings Rubbers and Plastics - Artificial Ageing by Weather-Ometer

Peugeot Citroen (PSA) D47 1431

Materials and Parts in the Passenger Compartment Appearance Behaviour to Artificial Light at High and Mean Temperatures

Renault D27 1911

Rubber and Plastic Paint Coatings - Artificial Ageing by Weather Ometer

Renault D47 1431

Materials and Passenger Compartment Parts Behaviour of the Appearance to Artificial Light at High and Medium Temperatures

SAE J1885

Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Water Cooled Xenon-Arc Apparatus

SAE J1960

Accelerated Exposure of Automotive Exterior Materials Using a Controlled Irradiance Water-Cooled Xenon Arc Apparatus

SAE J2412

Accelerated Exposure of Automotive Interior Trim Components Using a Controlled Irradiance Xenon-Arc Apparatus

SAE J2413

Protocol To Verify Performance of New Xenon Arc Test Apparatus

SAE J2527

Performance Based Standard for Accelerated Exposure of Automotive Exterior Materials Using A Controlled Irradiance Xenon-Arc Apparatus

VDA 621-429

Tests for automotive coatings - Weathering test for colour fastness

VDA 621-430

Tests for automotive coatings - Test for resistance to cracking of 2 layer metallic clear coats

VDA 75202

Automotive interior materials - Colourfastness and ageing test against light at high temperatures: Xenon arc

VW PV 1303

Non-metallic materials - Lightfastness test for interior parts

VW PV 3929

Non-Metallic Materials - Weather Ageing in Dry, Hot Climate

VW PV 3930

Non-Metallic Materials - Weathering in Moist, Hot Climate

 

如需了解更多ATLAS亚太拉斯产品，欢迎访问https://www.ibetter.com/atlas