REA Equipment Qualification DQ, IQ, OQ, PQ
REA Equipment Qualification
DQ, IQ, OQ, PQ
Equipment qualification in the context of quality management is indispensable for a large number of companies. REA VERIFIER offers you customer-specific IQ / OQ certifications, which comply with current regulations, company regulations and Good Manufacturing Practices (GMP).
Installation Qualification IQ
The Installation Qualification IQ is the documented proof that REA VERIFIER equipment has been delivered and installed in accordance with the requirements of the Design Qualification (DQ). The design qualification has already been carried out before commissioning. The suitability of the equipment system and the supplier has been checked. The order was then created and the equipment supplied. The assembly and installation of the analysis system is carried out by the operator and, where required, by the manufacturer/supplier. Proof of the completeness and functionality of the equipment hardware and software is ensured by functional tests and physical measurements.
IQ test plan: Contains detailed test steps on the tests to be carried out on the respective device in connection with the Installation Qualification IQ as well as the necessary prerequisites and documents to be included.
IQ report: After completion of the Installation Qualification IQ, the results are summarized, evaluated and recorded in an IQ final report. All deviations and the measures taken to eliminate them are documented.
Scope of Installation Qualification IQ:
Check if the delivery is complete
Check whether the equipment delivered works perfectly
Check measurement accuracy – initial
Check whether the system requirements have been created
Check whether there are quality specifications have been implemented as equipment settings/profiles for equipment settings
Check whether measurements have been logged as instructed and, where necessary, check whether the test reports are protected from being amended or deleted
Operation Qualification OQ
The Operation Qualification OQ is the commissioning of the testing technology in interaction with equipment hardware and measurement methods, including the proof that all customer specifications are available and covered by the device configuration. The user determines who is in charge of the equipment technology. Training of the operating staff is carried out by the user on his own responsibility, externally by the supplier or both. Operation Qualification can only be carried out after successful Installation Qualification IQ.
OQ test plan: Contains detailed test steps on the tests to be carried out on the respective device in connection with the Operation Qualification IQ as well as the necessary prerequisites and documents to be included.
OQ report: After completion of the Operation Qualification OQ, the results are summarized, evaluated and recorded in an OQ final report. All deviations and the measures taken to eliminate them are documented.
Scope of Operation Qualification OQ:
Commissioning
Creating system requirements
Training
Performance Qualification PQ
The Performance Qualification describes the regular testing of the device function during routine operation. Therefore, a monitoring strategy is defined to ensure the functionality of the analyzer system. This includes the execution and documentation of regular checks of measurement accuracy in the sense of test equipment monitoring (calibration). The test system is adjusted according to the manufacturer's specifications. The test data must be recorded as documented proof. Regular preventive maintenance work is carried out by the user and the manufacturer arranges for maintenance to be carried out as required. The user must check the validity of the calibration card and check whether it is damaged.
Scope of Performance Qualification PQ:
Continuous checking of correct equipment functionality
Regular checking of correct use
Regular checking of measurement accuracy
Regular checking as to whether there are any amended or additional quality specifications
Regular checking as to whether any amended or additional quality specifications have been transferred to the equipment settings
Check whether the test reports have been correctly stored/saved
上海备得数码科技有限公司作为瑞尔REA的专业销售与服务商,可提供REA一维码二维码检测仪、条码等级分析软件、校准卡以及相关配件耗材,同时提供产品技术支持、使用培训、维修校正等售后服务,如有相关需求欢迎随时联系我们!
相关产品链接:VeriMax Mobile二维码检测仪 VeriCube二维码检测仪 PC-Scan LD4一维码检测仪
如需了解更多瑞尔REA产品,欢迎访问https://www.ibetter.com/rea
- 2020-05-20
- 2019-01-01
- 2015-11-05
- 2020-06-04
- 2021-01-03
- 2020-05-13
- 2020-05-17
- 2020-03-21
- 2022-04-12
- 2019-12-06
- 2019-08-01
- 2019-08-01